Description

Our newest addition to our Strat replacement neck category is based off an early 1960’s Stratocaster to give you a real fat C-shaped contour and fill your hand. They say more mass equals more sustain and if that is the case, being almost an inch thick from the 1st fret through the 12th fret should give you the added sustain you’re looking for! Available in maple with maple or rosewood fretboards and unfinished so that you can apply your own preferred lacquer or oil finish.

All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. Armstrong Music does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell Armstrong Music does not hand-select necks based on appearance or weight. Armstrong Music neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.

Armstrong Music recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

Important Specs and Dimensions:
Fingerboard Radius = 10 in.
Nut Width = 1 5/8 in.

Nut slot = Flat
Profile Shape = Fat C-Shape
Fret type and count = Medium 6150 / 21 frets
Tuner peghole size = 11/32 in.
Binding = none

Neck Finish = Unfinished
Truss Rod location = heel
Skunk Stripe = YES
Neck and Fretboard Type = One-piece Maple
Heel Type = Standard Stratocaster
Orientation = Right-handed
1st Fret Thickness = 0.93 in.
12th Fret Thickness = 0.99 in.
Fret Marker = Black Dot